| Step | | Procedure & Parts & Tools |
| 1 |
|
LOCATE THE UNLOCK BUTTON ON THE BACK OF THE MACHINE. SLIDE THE BUTTON TO OPEN.
|
| 2 |
|
LIFT UP ON THE BODY TO DISCONNECT IT FROM THE BASE.
|
| 3 |
|
LAY THE NECK DOWN PARALLEL TO THE BASE.
| Screwdriver-phillips |
|
|
| 4 |
|
FLIP THE BASE OVER. REMOVE THE 7 SCREWS.
| Screwdriver-phillips |
|
|
| 5 |
|
FLIP THE BASE BACK OVER AND PULL UP ON BASE COVER TO REMOVE IT.
|
| 6 |
|
LOCATE THE BRUSH MOTOR. VISUALLY INSPECT THE CARBON BRUSHES LOCATED BETWEEN THE 2 WHITE WIRES AS SHOWN. THE LEAD END ON THE CARBON BRUSH SHOULD BE TOUCHING THE COIL.
|